Us Motors Perfect Speed User Interface Manual
- Jun 27, 2019 Every Mainstream Vehicle You Can Buy With a Stick Shift in 2019, Ranked. There’s nothing quite like dancing on all three pedals, making nicely synchronized downshifts as you dive into a corner, then keeping the revs high as you burst from the turn with perfectly timed upshifts.
- Motor with User Interface isn’t running, perform the following. Checks: Motor Is Not Running. Ensure that both the PerfectSpeed ® motor and User Interface have proper line. Voltage for intended application. Turn the User Interface on-board potentiometer fully clockwise (100% demand) and check to see if the motor runs.
- Nidec Motor Corporation is a leader in EC motor technologies for a variety of industries including commercial and residential applications in HVAC, refrigeration, and the pool and spa markets. BPM motors provide high power density for their size.
- Page 1 Zone Perfect Plus Zoning Systems USER’S INFORMATION MANUAL NOTE TO INSTALLER: This manual must be left with the equipment user.; Page 2: Product View Zone Perfect Plus allows your heating and cooling system to follow your schedule and provide greater comfort in areas which are difficult to heat or cool.
. Ability to remotely mount the V-Green 270 user interface (provides easy access of user interface depending on pump location). Ability to configure prime speed and prime duration. If power is connected to the V-Green 165 motor, pressing any of the following buttons referred to in section 2 could result in the motor starting.
4
PerfectSpeed
®
User Interface Box
The PerfectSpeed
®
operates in speed mode when connected to the pump. You can
adjust the demand of the motor manually using the PerfectSpeed® User Interface.
The motor inf
ormation displayed in the User Interface is outlined in Table 1. If the
motor encounters
a problem, the User Interface displays a corresponding error code.
These are outlined in Table 1 as well.
Table 1 – User Interface Display Information
Control Mode
Data Displayed
Speed (speed feedback)
Spd – followed by the instantaneous speed in RPM
dE
– followed by S + demand in %
Hp owners manuals free downloads. Evinrude outboard engines are lightweight and feature quiet operation. They have compact dimensions,easily transported and mounted on the stern of the boat. Due to the presence of the E-Tec direct injectionsystem, boat engines are highly economical, since the fuel is supplied directly to the combustion chamber, where it is layer-by-layer burning.
Error Codes
E1 – No communications
E2 – Under V
oltage
E4 – Non-NMC Motor
Minimum and Maximum Operating Parameters
The PerfectSpeed
®
motor operates properly within minimum and maximum
parameters.
Your settings must be within these ranges.
PerfectSpeed
®
NEMA 48 Pump Motor
PerfectSpeed
®
Motor and User Interface
If the PerfectSpeed
®
motor with User Interface isn’t running, perform the following
checks:
Motor Is Not Running
1. Ensure that both the PerfectSpeed
®
motor and User Interface have proper line
voltage for intended application.
2. Turn the User Interface on-board potentiometer fully clockwise (100% demand)
and check to see if the motor runs.
3. If 0-10 VDC input is in use, disconnect the external input from the User Interface
and perform
Check 2.
4. Check the digital read-out of User Interface for an error code:
Table 5– User Interface Error Codes
Error Code
Reason
Action
E1
No Communication
Remove power from both the
PerfectSpeed
®
motor and User
Interface for four (4) minutes,
then reconnect power and test
again.
Check the communication cable
conf- nection between the
PerfectSpeed
®
motor and User
Interface.
Check the continuity of
communica
tion cable (pin 1-1, pin
2-2 pin 3-4, and pin 4 3).
E2
Low V
oltage
This is a reading from the
PerfectSpeed
®
motor itself. Ensure
that there is at least 71
VAC (for 115
VAC applications) or 142 VAC (for
230
VAC applications).
E4
Not a NMC Motor
Us Motors Perfect Speed
Connect to
a NMC motor.
Perfectspeed Motor User Interface Video
9