LED LENSER® H7R.2. 7398, LED LENSER® H7R.2 (Blister) Version of the operating manual: 1.4. Battery set: 1 x Li-ion battery pack 3.7 V (1400 mAh) 4XAAA alkaline battery (Blister) 2. The H7R.2 has two switches. The front switch. Is located on the right side of the headlamp. This switch button is used to turn the. Led Lenser M7 Manuals & User Guides. User Manuals, Guides and Specifications for your Led Lenser M7 Flashlight. Database contains 2 Led Lenser M7 Manuals (available for free online viewing or downloading in PDF): Instruction card, Manual. View and Download LED LENSER X21.2 user manual online. X21.2 Flashlight pdf manual download. Ask the question you have about the Led Lenser X21R here simply to other product owners. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Led Lenser X21R owners to provide you with a good answer.

• Led Lenser X21r.2 User Manual Free
• Led Lenser X21r.2 User Manual 2016
• Led Lenser X21r.2 User Manual Instructions
• Led Lenser V2 Flashlight
• Led Lenser Warranty
• Led Lenser X21r.2 User Manual Download
• Led Lenser X21r.2 User Manual Online

To save you long searches, we’ve provided you with important documents to download, such as user manuals and data sheets for your product.

Downloads

For flashlights

Car Lamp

D-Series

EX-Series

F-Series

i-Series

iL-Series

K-Series

M-Series

Outdoor

P-Series

T-Series

X-Series

For headlamps

EX-Series

H-Series

i-Series

iL-Series

NEO Series

Outdoor

SEO Series

XEO Series

For worklights

i-Series

For floodlights

i-Series

For lanterns

i-Series

Lantern

Outdoor

Guarantee and warranty for individual customers

Service

At Ledlenser not only are the products long-lasting, but so is the warranty.

You are just a few clicks away from finding the right Ledlenser

Product Consultant

Our range of lights is just as varied as the people who use them. In just a few clicks our Product Consultant will help you find a light to perfectly suit you.

Enlightening answers to common questions

Ledlenser FAQs

Questions are there to be asked. But some have already been answered – in our FAQs.

Pressing the button once more will turn the lamp off.

7.4 Light Program Signal ( )

In the fourth position from the left, by switching or tapping, the Light

Function SOS (3 short, followed by 3 long, followed again by 3 short

flashes) can be invoked immediately.

When the Light Function SOS is activated, tapping the switch will cycle

through two additional functions. The first tap will activate the Light

Led Lenser X21r.2 User Manual Free

Function Blink (slow, continuous blinking). Tapping once again will

activate the Light Function Signal Blink (double flash at short intervals).

Tapping a third time will activate the Light Function SOS again.

Pressing the button one more time will turn the lamp off.

7.5 Light Program Defence ( )

The Light Mode Defence is the one on the extreme right on the selection

ring; it can be selected by turning the selection ring completely to the left

till it comes to a stop.

After operating the switch the Light Function Strobe is set. Afterwards,

by tapping briefly it is possible to toggle between the Strobe and the

Power Mode.

Pressing the button once more when the lamp is on will turn the lamp

off.

Like in the other Light Modes 2 to 4, the Light Functions can be cycled

through by successively tapping the switch; this means, for example, that

in Light Mode 5, tapping the switch when in the Light Function Power will

enable the Light Function Defence and vice versa.

When the X21R.2 is operating in one of the Light Functions (2, 3, 4 or

5), turning the “Fast Action Switch“ will immediately switch over to the

corresponding Light Function. After such a changeover, the X21R.2 will

have the same Light Function enabled that it would have when first

turning the “Fast Action Switch“ and then switching on the lamp, e.g. with

the Light Program Signal, the Light Function SOS would be activated.

8. Emergency Mode / Emergency Light Function

When the Emergency Mode is activated, the X21R.2 has an emergency

light function. To use this function, the mode has to be activated and the

X21R.2 has to be connected to the charger (position light at the charger

glows blue, see Point 10). In this case, the torch automatically goes on

when the electric supply that is providing energy to the charger fails.

If positioned meaningfully, the X21R.2 can facilitate finding quickly an

escape route in an emergency, or the lamp can be quickly found and

picked up, already switched on. If this function is active, the X21R.2

shines automatically even if the charging process is interrupted by

removing the X21R.2. Therefore, the function can also be used when the

X21R.2 has to be ready for immediate use.

To set the Emergency Mode, set the „Fast Action Switch“ to ( the second

position) Light Program Low and tap prolonged for about 10 seconds.

The X21R.2 glows for these 10 seconds and then blinks. After blinking,

the light turns off. When it flashes 4 times, Emergency Mode is activated;

if it flashes twice, Emergency Mode is disabled. If this procedure is

carried out again, the setting toggles between activated and disabled and

signals this by a corresponding blinking.

9. Reset function

Unscrewing the Power Module (shaft with “Safety Ytrion Cell“ battery

pack) from the lamp head and reassembling the two parts again after a

while will reset the X21R.2. This resets the following functions:

The Energy Mode, Energy Saving is active (see Point 6).

The Emergency Mode (see Point 8) is active.

The lamp function Dim (see Point 7.2) is set to the lowest brightness.

10. Charging

The Power Module (shaft without lamp head) contains the “Safety Ytrion

Cell“ battery pack, the rechargeable batteries.

Charge your X21R.2 only in a dry place.

For charging, connect the main cable on one side to the charger provided

(Input: 100 V to 240 V / 50 Hz to 60 Hz) and one the other side to a mains

power socket. Then connect the extension cable of the charger to the

cable of the magnetic charging socket, whose blue position light will start

to glow. You can now connect the concentric charging contacts at the end

of the X21R.2 to the magnetic charging socket. When the lamp has been

correctly attached, the charging display glows red (see Point 11) and the

charging starts. The Power Module (shaft with the “Safety Ytrion Cell“

battery pack) with the unscrewed lamp head can also be charged by

itself.

See the following section on the subject of the charging indicators (see

Point 11) for more information.

Note – Please ensure that there is no short-circuit at the charging

contacts. The charging contacts must not be touched with moist or

metallic objects.

The magnetic charging socket can also be inserted in the cylindrical part

of the charger bracket, which is part of the supplied kit, and then locked

into place by turning a couple of times in the counter-clockwise direction

like a bayonet lock. The lock is released by rotating in the other direction.

The bracket can be fastened on the wall with dowels (not supplied with

the lamp) in such a way that the blue position lamp of the magnetic

charging socket, for example, glows downwards. Please use a sufficient

number (min. 4 pieces) of suitable dowels, depending on the material of

the wall.

The orientation described suggests itself that when you wish to use the

Emergency Module / Emergency Light function (see point 8) the X21R.2

will shine upwards in case of a power failure. On the other side of the

Led Lenser X21r.2 User Manual 2016

bracket, the X21R.2 can be joined to the bracket with 2 rubber rollers

The plastic body is good quality but the battery compartment cover was very stiff and I had to leverage the clasp using a pair of pliers to get it open. The addition of a mute button for the audible output is welcomed and the vibrate function is good and strong.Start up and self-calibration takes about a minute and the long flexible sensor is easily positioned and stiff enough to stay put. Ridgid micro cd 100 user manual. The controls are logical, well laid out and easy to use. I guess this is because potential sparks from batteries and certain gases don’t mix very well.

and fixed permanently by using the rubber gusset that is located at the

level of the two rubber rollers. The latter suggests itself if there are

acceleration forces acting on the X21R.2. In this manner, the X21R.2 can

be fixed in the bracket inside the vehicle if the charger bracket is fixed

permanently to a vehicle.

Using an optionally available car charger (needs to be purchased

separately), the X21R.2 can also be charged at the cigarette lighter and

power sockets in the vehicle. These accessory units adjust themselves

automatically to the respective input voltage (from nominal 12 V to 24 V).

When the car is off, the charger doesn’t provide output if the voltage of

the battery in the car is lower than 13.0V, in order to protect your car;

you cannot charge the torch in this condition.

11. Charge indicator

Approx. 2 cm before the end of the shaft of the X21R.2 is a narrow ring

which, during the charging process, indicates the charge status of the

battery through lamps of different colours.

Red: (glowing continuously) charging on going.

Green: (glowing continuously) charging completed, the X21R.2 is ready

for use with the full capacity of the battery. It generally takes 2 to 3 hours

for an empty X21R.2 to get fully charged.

No light: The cause of this can be that the Floating Charge System

Pro

is

not getting adequate electrical power. But it can also be that there is a

loose contact. Therefore, check whether (magnetic) objects or dirt are

preventing a good contact between the charging contacts at the end

Led Lenser X21r.2 User Manual Instructions

of the X21R.2 and the magnetic charging socket. If required, remove

them. If required, also correct the position or the angle of the X21R.2

in the charging socket. If, given an adequate electric power supply, the

charge indicators still do not glow, immediately unplug the transformer

or the optional car charger of the X21R.2 from the present power supply

system and get in touch with your dealer.

12. 360° Power Indicator

The 360° Power Indicator consists of 10 blue-glowing elements, which

are arranged in a circle around the two concentric charging contacts at

the end of the shaft of the X21R.2. Smok novo kit.

During use the number of blue-glowing elements reduces further and

just before the Power Module is empty, the last element will glow in red.

Depending on when the charging contacts are pressed, the following can

be determined from the number of elements glowing.

12.1 Battery status indication

If the charging contacts are pressed while the X21R.2 is off, the elements

serve as a battery status indication. If, for example, all the 10 elements

briefly glow blue, the X21R.2 is fully charged.

12.2 Operating time indication

If the charging contacts of the X21R.2 are pressed while the X21R.2 is

being operated with a Light Function, the number of glowing elements

provides an indication of the remaining relative lighting duration of the

current Light Function.

Led Lenser V2 Flashlight

The X21R.2 also shows this information for a brief moment when a Light

Function has been selected by tapping or switching at the “Fast Action

Switch“, i.e. even without the 360° Power Indicator having been actuated.

13. Changing the Power Module

Please charge the rechargeable battery in time. If the Power Module

exhibits any atypical behaviour, please change it. For changing the

rechargeable battery, please first switch off the torch and unscrew the

part behind the “Fast Action Switch“. You have thus separated the lamp

head from the Power Module (shaft including “Safety Ytrion Cell“ battery

pack). For the disposal of the used Power Module, please read Point 14.

Screw on a new Power Module onto the lamp head till it cannot be turned

any further. Thanks to the innovative new contact system and the fixed

connection between the lamp shaft and the “Safety Ytrion Cell“ battery

pack (Power Module), reversing the polarity is not possible.

14. Rechargeable batteries

Only the correspondingly approved LED LENSER Power Module

consisting of the “Safety Ytrion Cell“ battery pack and shaft may be used

in this pocket torch. The Power Module was developed to ensure the

highest level of safety and convenience.

If you have separated the used Power Module from the lamp head as

described in Point 13, please unscrew the rear part of the shaft at the

level of the charging display. When inspecting the tube, a PCB on the

end of the “Safety Ytrion Cell“ battery pack should be there. The PCB

is held in place on this side in the shaft by a narrow plastic ring with

thread. When removing the “Safety Ytrion Cell“ battery pack from the

shaft, unscrew this plastic ring from the shaft. For doing so, use the two

grooves in the plastic ring that are displaced 180° from one another, but

make sure that you do not short-circuit the contacts of the „Safety Ytrion

Cell“ battery pack. The „Safety Ytrion Cell“ battery pack can now be easily

Led Lenser Warranty

removed and disposed of by observing the national laws. The shaft can

04

English

Led Lenser X21r.2 User Manual Download

Page 03-05

GB

Led Lenser X21r.2 User Manual Online